AJ Aircraft 106" Raven Edge wing style ARF
The 411:
Wing Span - 106"
Length - 100"
Height - 27"
Wing Area - SLE 2,095 sq-in, DT 2104 sq-in
AUW (dry) - 27-28 lbs.
Gas Power - 120cc
Radio - 9 channel with 8 high torque servos (400 oz./in minimum) & 1 throttle servo
IMAC Legal!
Recommended CG Range and Control Throws
The center of gravity (CG) range for the 106" Raven is located 1-1/2" in front of the wing tube (+/- 1/2")
Aileron Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Elevator Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Rudder Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - Max Throw (50% Exp)
What's in the box:
Carbon-Kevlar plywood construction!
Carbon-Kevlar reinforced landing gear mount!
Carbon-Kevlar reinforced firewall!
Durable, lightweight one piece cowl design!
Canopy complete with cockpit!
Pre-hinged, glued and sealed ailerons & elevators
Carbon fiber main landing gear
Carbon fiber main wing tube
Dual carbon fiber stab tubes
Removable horizontal stabs & rudder
G10 fiberglass control horns
Aluminum standoffs for gas engines
Full-length canister tunnel
Heavy duty foam wheels with aluminum hubs
Heavy duty steel axles
Heavy duty pre-drilled wheel pants
Pre-drilled & rubber lined landing gear cuffs
Firewall drilling templates for common engines
Pre-run rudder pull-pull wires
High quality ball links & turnbuckles for all connections
Extra hardware bag for spares
Velcro for fuel tank or battery restraint
All airframe components covered in genuine Ultracote (White HANU870, True Red HANU866, Cub Yellow HANU884)
NOTE: This product is shipped in two separate boxes.
AJ flies this airframe with the following equipment:
Exhaust - Desert Aircraft Compact Mufflers
Propeller - Falcon 28x10
Servos
(8) x Futaba S9177SV Servos (S.Bus2) for all surfaces
(1) x Futaba 9670SV for throttle
Gas Tank - (1) x AJ Aircraft single 34oz (1000ml)
Ignition Kill - Powerbox Spark Switch 5.9v
Engine Baffle
Also needed to complete:
Servo Extensions
(4) x 6" extensions for receiver to ailerons
(2) x 6" extensions for inner aileron
(2) x 24" extensions for outer ailerons
(1) x 24" extension for throttle servo
(1) x 24" extension for ignition kill
(2) x 36" extensions for push-pull rudder (only needed for push/pull setup)
(2) x 60" extensions for elevators
Aluminum Servo Arms
(4) x 1.75" single arms for ailerons
(2) x 1.75" single arms for elevators
(2) x 1.75" single arms for rudder (only needed for push/pull setup)
(1) x 3.50" double arm for rudder
The 411:
Wing Span - 106"
Length - 100"
Height - 27"
Wing Area - SLE 2,095 sq-in, DT 2104 sq-in
AUW (dry) - 27-28 lbs.
Gas Power - 120cc
Radio - 9 channel with 8 high torque servos (400 oz./in minimum) & 1 throttle servo
IMAC Legal!
Recommended CG Range and Control Throws
The center of gravity (CG) range for the 106" Raven is located 1-1/2" in front of the wing tube (+/- 1/2")
Aileron Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Elevator Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Rudder Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - Max Throw (50% Exp)
What's in the box:
Carbon-Kevlar plywood construction!
Carbon-Kevlar reinforced landing gear mount!
Carbon-Kevlar reinforced firewall!
Durable, lightweight one piece cowl design!
Canopy complete with cockpit!
Pre-hinged, glued and sealed ailerons & elevators
Carbon fiber main landing gear
Carbon fiber main wing tube
Dual carbon fiber stab tubes
Removable horizontal stabs & rudder
G10 fiberglass control horns
Aluminum standoffs for gas engines
Full-length canister tunnel
Heavy duty foam wheels with aluminum hubs
Heavy duty steel axles
Heavy duty pre-drilled wheel pants
Pre-drilled & rubber lined landing gear cuffs
Firewall drilling templates for common engines
Pre-run rudder pull-pull wires
High quality ball links & turnbuckles for all connections
Extra hardware bag for spares
Velcro for fuel tank or battery restraint
All airframe components covered in genuine Ultracote (White HANU870, True Red HANU866, Cub Yellow HANU884)
NOTE: This product is shipped in two separate boxes.
AJ flies this airframe with the following equipment:
Exhaust - Desert Aircraft Compact Mufflers
Propeller - Falcon 28x10
Servos
(8) x Futaba S9177SV Servos (S.Bus2) for all surfaces
(1) x Futaba 9670SV for throttle
Gas Tank - (1) x AJ Aircraft single 34oz (1000ml)
Ignition Kill - Powerbox Spark Switch 5.9v
Engine Baffle
Also needed to complete:
Servo Extensions
(4) x 6" extensions for receiver to ailerons
(2) x 6" extensions for inner aileron
(2) x 24" extensions for outer ailerons
(1) x 24" extension for throttle servo
(1) x 24" extension for ignition kill
(2) x 36" extensions for push-pull rudder (only needed for push/pull setup)
(2) x 60" extensions for elevators
Aluminum Servo Arms
(4) x 1.75" single arms for ailerons
(2) x 1.75" single arms for elevators
(2) x 1.75" single arms for rudder (only needed for push/pull setup)
(1) x 3.50" double arm for rudder
The 411:
Wing Span - 106"
Length - 100"
Height - 27"
Wing Area - SLE 2,095 sq-in, DT 2104 sq-in
AUW (dry) - 27-28 lbs.
Gas Power - 120cc
Radio - 9 channel with 8 high torque servos (400 oz./in minimum) & 1 throttle servo
IMAC Legal!
Recommended CG Range and Control Throws
The center of gravity (CG) range for the 106" Raven is located 1-1/2" in front of the wing tube (+/- 1/2")
Aileron Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Elevator Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - 45 deg. (50% Exp)
Rudder Control Throws
Low Rates - 15 deg. (30% Exp)
Mid Rates - 35 deg. (40% Exp)
High Rates - Max Throw (50% Exp)
What's in the box:
Carbon-Kevlar plywood construction!
Carbon-Kevlar reinforced landing gear mount!
Carbon-Kevlar reinforced firewall!
Durable, lightweight one piece cowl design!
Canopy complete with cockpit!
Pre-hinged, glued and sealed ailerons & elevators
Carbon fiber main landing gear
Carbon fiber main wing tube
Dual carbon fiber stab tubes
Removable horizontal stabs & rudder
G10 fiberglass control horns
Aluminum standoffs for gas engines
Full-length canister tunnel
Heavy duty foam wheels with aluminum hubs
Heavy duty steel axles
Heavy duty pre-drilled wheel pants
Pre-drilled & rubber lined landing gear cuffs
Firewall drilling templates for common engines
Pre-run rudder pull-pull wires
High quality ball links & turnbuckles for all connections
Extra hardware bag for spares
Velcro for fuel tank or battery restraint
All airframe components covered in genuine Ultracote (White HANU870, True Red HANU866, Cub Yellow HANU884)
NOTE: This product is shipped in two separate boxes.
AJ flies this airframe with the following equipment:
Exhaust - Desert Aircraft Compact Mufflers
Propeller - Falcon 28x10
Servos
(8) x Futaba S9177SV Servos (S.Bus2) for all surfaces
(1) x Futaba 9670SV for throttle
Gas Tank - (1) x AJ Aircraft single 34oz (1000ml)
Ignition Kill - Powerbox Spark Switch 5.9v
Engine Baffle
Also needed to complete:
Servo Extensions
(4) x 6" extensions for receiver to ailerons
(2) x 6" extensions for inner aileron
(2) x 24" extensions for outer ailerons
(1) x 24" extension for throttle servo
(1) x 24" extension for ignition kill
(2) x 36" extensions for push-pull rudder (only needed for push/pull setup)
(2) x 60" extensions for elevators
Aluminum Servo Arms
(4) x 1.75" single arms for ailerons
(2) x 1.75" single arms for elevators
(2) x 1.75" single arms for rudder (only needed for push/pull setup)
(1) x 3.50" double arm for rudder
