OMP Hobby M1 RTF Heli with Remote and Batteries in Mode 1 or Mode 2
Description
The all new OMP M1 Micro direct drive 3D RC helicopter has finally landed in Australia! We also carry a full stock of spare parts. This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S etc. SFHSS transmitter. You can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here).
Spare batteries can be purchased here.
Plug and play Spektrum compatible receiver is avaliable here.
Please find the OMPHOBBY Hobby M1 PDF Instruction / repair manual here.
OMPHOBBY M1 flight controller settings manual here. (comes in the box)
Specifications
Length: 290mm
Height: 88mm
Main Blade: 125mm
Main Rotor Diameter: 290mm
Tail Rotor Diameter: 46.5mm
Flying Weight: 118g
Dimensions: 90mm x 88mm x 290mm
Battery: 2s 350mah 50C
Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle.
Servo: All metal gears, poly carbonate casing, high-performance servos
RTF Package Includes:
1x OMPHOBBY M1 RC Helicopter with built-in protocol
2x Battery
1x EPP Box
1x Wrench
1x 1mm Hex Screwdriver
3x Spare Servo Horns
Several Spare Screws
1x Charger Cable Adapter with XT60 plug
Remote Mode 1 or mode 2 (pick your mode)
WARNING:
R/C helicopters, including The OMPHOBBYM1 are not toys. R/C helicopters utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read the manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating all OMPHOBBY products.
Manufacturer and seller assumes no liability for the operation or the use of this product. Intended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A local expert is the best way to properly assemble, setup, and fly your model for the first time. OMPHOBBY M1 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or replacement.
Description
The all new OMP M1 Micro direct drive 3D RC helicopter has finally landed in Australia! We also carry a full stock of spare parts. This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S etc. SFHSS transmitter. You can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here).
Spare batteries can be purchased here.
Plug and play Spektrum compatible receiver is avaliable here.
Please find the OMPHOBBY Hobby M1 PDF Instruction / repair manual here.
OMPHOBBY M1 flight controller settings manual here. (comes in the box)
Specifications
Length: 290mm
Height: 88mm
Main Blade: 125mm
Main Rotor Diameter: 290mm
Tail Rotor Diameter: 46.5mm
Flying Weight: 118g
Dimensions: 90mm x 88mm x 290mm
Battery: 2s 350mah 50C
Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle.
Servo: All metal gears, poly carbonate casing, high-performance servos
RTF Package Includes:
1x OMPHOBBY M1 RC Helicopter with built-in protocol
2x Battery
1x EPP Box
1x Wrench
1x 1mm Hex Screwdriver
3x Spare Servo Horns
Several Spare Screws
1x Charger Cable Adapter with XT60 plug
Remote Mode 1 or mode 2 (pick your mode)
WARNING:
R/C helicopters, including The OMPHOBBYM1 are not toys. R/C helicopters utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read the manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating all OMPHOBBY products.
Manufacturer and seller assumes no liability for the operation or the use of this product. Intended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A local expert is the best way to properly assemble, setup, and fly your model for the first time. OMPHOBBY M1 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or replacement.
Description
The all new OMP M1 Micro direct drive 3D RC helicopter has finally landed in Australia! We also carry a full stock of spare parts. This is a “bind and fly” helicopter kit which requires a separate compatible radio transmitter of your choice. The onboard flight controller has a built in Futaba Protocol (SFHSS) receiver for use straight out of the box with a Futaba / Radiomaster TX16S etc. SFHSS transmitter. You can also use a SPEKTRUM / DSMX transmitter and receiver (adapter cable sold here), FrSky, etc. transmitter and receiver via S.BUS port (adapter cable sold here).
Spare batteries can be purchased here.
Plug and play Spektrum compatible receiver is avaliable here.
Please find the OMPHOBBY Hobby M1 PDF Instruction / repair manual here.
OMPHOBBY M1 flight controller settings manual here. (comes in the box)
Specifications
Length: 290mm
Height: 88mm
Main Blade: 125mm
Main Rotor Diameter: 290mm
Tail Rotor Diameter: 46.5mm
Flying Weight: 118g
Dimensions: 90mm x 88mm x 290mm
Battery: 2s 350mah 50C
Flight time: the maximum flight time is 8 minutes at ~ 50% throttle and 4 minutes at ~ 90% throttle.
Servo: All metal gears, poly carbonate casing, high-performance servos
RTF Package Includes:
1x OMPHOBBY M1 RC Helicopter with built-in protocol
2x Battery
1x EPP Box
1x Wrench
1x 1mm Hex Screwdriver
3x Spare Servo Horns
Several Spare Screws
1x Charger Cable Adapter with XT60 plug
Remote Mode 1 or mode 2 (pick your mode)
WARNING:
R/C helicopters, including The OMPHOBBYM1 are not toys. R/C helicopters utilize various high-tech products and technologies to provide superior performance. Improper use of this product can result in serious injury or even death. Please read the manual carefully before using and make sure to be conscious of your own personal safety and the safety of others and your environment when operating all OMPHOBBY products.
Manufacturer and seller assumes no liability for the operation or the use of this product. Intended for use only by adults with experience flying remote control helicopters at a legal flying field. After the sale of this product we cannot maintain any control over its operation or usage.
We recommend that you obtain the assistance of an experienced pilot before attempting to fly our products for the first time, A local expert is the best way to properly assemble, setup, and fly your model for the first time. OMPHOBBY M1 Helicopter requires a certain degree of skill to operate, and is a consumer item. Any damage or dissatisfaction as a result of accidents or modifications are not covered by any warranty and cannot be returned for repair or replacement.
